Mitsubishi-electric DATA PROJECTOR Manuel d'utilisateur télécharger pdf (Page 63)

E-62

Replacing the Lamp Cartridge

Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to

replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.

Unplug the power cord.

Turn the projector upside-down.

Remove the lamp cover.

(1) Turn the lamp cover’s set screw counterclockwise and

loosen until the screw turns freely. (The screw does

not come off.)

(2) Open the lamp cover a little, then pull it in the direc-

tion of the arrow and remove it.

Remove the lamp cartridge.

(1) Turn the lamp cartridge’s screw counterclockwise and

loosen them until the screw turn freely. (The screw

do not come off.)

(2) Grasp the lamp cartridge’s handle and pull upward

to remove the lamp cartridge.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Mitsubishi-electric DATA PROJECTOR Manuel d'utilisateur Page 63