Mitsubishi-electric DATA PROJECTOR Manuel d'utilisateur télécharger pdf (Page 54)

E-53

Presentation Timer

The presentation is given while checking the timer displayed on the

screen.

The gauge display allows the remaining time to be known at a glance.

Select the item name “Presentation Timer” and select the setting contents

with the SELECT 왗왘 buttons.

Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.

To start the timer...

Press the MENU button and open the menu.

The timer display will appear at the lower right and the timer will start.

See “Using the Presentation Timer” on Page E-30 for details.

Setup

Input Format

This function is used in setting the input signals of the input connec-

tors.

Normally, this should be set to Auto. When identification is not possible

with Auto, make the setting.

Select the item name “Input Format”, press the ENTER button, and the sub

menu will open.

Select the connector that is to be changed, and select the setting contents

with the SELECT 왗왘 buttons.

[RGB]

This is the signal setting for the RGB connector.

Auto ............ Automatically identifies the signal.

RGB ............ Analog RGB signal is set.

Component . Component signal is set.

[Video] and [S-Video]

[Video] is the color system setting for the VIDEO connector and [S-Video] is

the color system setting for the S-VIDEO connector.

Auto ............ Automatic identification.

NTSC .......... Fixed to the NTSC system.

NTSC 4.43 .. Fixed to the NTSC 4.43 system.

PAL ............. Fixed to the PAL system.

PAL M ......... Fixed to the PAL M system.

PAL N ......... Fixed to the PAL N system.

PAL 60 ........ Fixed to the PAL 60 system.

SECAM ....... Fixed to the SECAM system.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 67 68

Pas de commentaire

Mitsubishi-electric DATA PROJECTOR Manuel d'utilisateur Page 54