Mitsubishi Electric JT-SB216JSH-H-E Spécifications télécharger pdf (Page 23)

─ 23 ─

Assembly precautions

• Take care not to pinch the lead wires.

• Hook the claw of the terminal block fix holder to the terminal block

fix plate. (Indicated by )

(8) Switch (assembly) (with a thermal fuse)

1 Remove the terminal block fix plate from the side panel (left).

→ See (7) 1 to 7.

2 Remove the power switch lead wires (brown and blue) from the ter-

minal block. (Indicated by )

3 Unscrew the clamping screw, and remove the terminal block.

(One PTT screw 4×6, indicated by )

Terminal block

4 Unscrew the clamping screw, and remove the switch fix piece and

the switch (assembly).

(One PPT screw 3×8, indicated by )

Switch fix piece

Assembly precaution

Hook the claw of the switch fix piece to the terminal block fix plate.

(Indicated by )

(9) Heater (PTC)

1 Remove the side panel (left). → See (7) 1 to 5.

2 Unscrew the side panel (right) clamping screw.

(One PTT screw 4×16, indicated by )

For JT-SB216JSH-W/H/S-E

Side panel (right) Panel (back)

Assembly precaution

Run the lead wires through the groove of the base. (Indicated by )

Terminal block fix plate

Switch (assembly)

3 Remove the side panel (right) in the direction of the arrow.

Assembly precaution

Fit the side panel (right) into the groove of the panel (back) and the

base. (Indicated by )

Terminal block

fix holder

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 58 59

Pas de commentaire

Mitsubishi Electric JT-SB216JSH-H-E Spécifications Page 23