Mitsubishi Electric MUH-GA25VB Manuel de service télécharger pdf (Page 27)

DISASSEMBLY INSTRUCTIONS

MUH-GA20VB MUH-GA25VB MUH-GA35VB

OUTDOOR UNIT

OPERATING PROCEDURE PHOTOS

1. Removing the cabinet

(1) Remove the screws of the top panel.

(2) Remove the screw of the service panel.

(3) Remove the screws of the cabinet.

(4) Remove the screws of the cabinet and motor support.

(5) Remove the service panel, and remove the screw from

the insides.

(6) Remove the top panel.

(7) Remove the cabinet.

(1) Slide the sleeve and check if there is a locking lever or not.

(2) The terminal with this connector has the locking

mechanism.

Slide the sleeve.

Pull the terminal while

pushing the locking

lever.

Hold the sleeve, and

pull out the terminal

slowly.

The terminal which has the locking mechanism can be detached as shown below.

There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.

The terminal without locking mechanism can be detached by pulling it out.

Check the shape of the terminal before detaching.

<"Terminal with locking mechanism" Detaching points>

Connector

Sleeve

Locking lever

Photo 1

Photo 3

Screws of the

top panel

Screw of the

service panel

Screw of the cabinet

Screws of the

top panel

Screws of the

cabinet

Screws of the cabinet

Photo 2

Screw of the cabinet and motor support

MUH-GA20VB

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi Electric MUH-GA25VB Manuel de service Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Climatiseurs à système divisé Mitsubishi Electric MUH-GA25VB