Mitsubishi Electric MSZ-EF42VES Manuel de service télécharger pdf (Page 31)

MSZ-EF22VEW MSZ-EF25VEW MSZ-EF35VEW MSZ-EF42VEW MSZ-EF50VEW

MSZ-EF22VEB MSZ-EF25VEB MSZ-EF35VEB MSZ-EF42VEB MSZ-EF50VEB

MSZ-EF22VES MSZ-EF25VES MSZ-EF35VES MSZ-EF42VES MSZ-EF50VES

NOTE: Turn OFF power supply before disassembly.

OPERATING PROCEDURE PHOTOS

1. Removing the panel

(1) Remove the horizontal vanes.

(2) Remove the screw caps of the panel. Remove the

screws of the panel.

(3) Unhook the lower part ( ) of the panel.

(4) First, hold the lower part of the right end of the panel,

and hold the lower part of the left end of the panel.

(5) Pull the panel

slightly toward you, and then remove

the panel by pushing

it upward.

Photo 1

(1) Slide the sleeve and check if there is a locking lever or not.

(2) The terminal with this connector has the

locking mechanism.

Slide the sleeve.

Pull the terminal while

pushing the locking

lever.

Hold the sleeve, and

pull out the terminal

slowly.

Connector

Sleeve

Locking lever

<"Terminal with locking mechanism" Detaching points>

The terminal which has the locking mechanism can be detached as shown below.

There are two types (Refer to (1) and (2)) of the terminal with locking mechanism.

The terminal without locking mechanism can be detached by pulling it out.

Check the shape of the terminal before detaching.

DISASSEMBLY INSTRUCTIONS

Screws of

the panel

Front panel Horizontal vanes

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Mitsubishi Electric MSZ-EF42VES Manuel de service Page 31