Mitsubishi Electric DX-TL950E Manuel d'instructions Page 69
- Page / 108
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
69
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
<ALARM SKIP SEARCH>
>>
EXECUTE(FORWARD)
EXECUTE(REVERSE)
PUSH SEARCH KEY FOR
SEARCH SELECTION
6. To stop playback or still-frame playback, press the STOP button.
To change the desired camera number to the single screen dis-
play during still-frame playback in SPLIT9 display, press the SEARCH
button to clear the search setting screen and press the desired cam-
era number button.
Search may not perform properly at times depending on the re-
corded condition of the index signals.
7. To clear the search screen, press the SEARCH button twice.
■ ALARM SKIP SEARCH
This function searches up to where the Alarm recording signal is located,
and can playback at 4 second intervals.
<ALARM SKIP SEARCH> In the case of forward direction
SKIP COUNT
0302
01
Alarm
Recording
Alarm
Recording
Alarm
Recording
Index signalIndex signalIndex signal
Search SearchSearch Search
Present position
Approx. 4 sec.
play
Approx. 4 sec.
play
Approx. 4 sec.
play
1. Press the SEARCH button.
• The search screen selected in the “SEARCH TYPE” ( see page 67) appears.
2. (When the desired search screen is not displayed on the screen • • • )
Change the previous “SEARCH TYPE” setting and display the “ALARM SKIP
SEARCH” screen.
3. Select “EXECUTE(FORWARD)” or “EXECUTE(REVERSE)” and confirm.
• “EXECUTE(FORWARD)” : Search is performed in the forward direction.
• “EXECUTE(REVERSE)” : Search is performed in the reverse direction.
• To cancel the search, press the SEARCH button twice.
• Playback of search result from skip search will be in SPLIT9 display regardless
of whether the “SELECTION CAMERA NUMBER” ( see page 67) is set to
“ALL” or individual camera number is selected.
• To return to the normal screen, press the SEARCH button twice.
When execute “ALARM SKIP SEARCH” while the “PARTITION”
is set, set to “SUB” in “PLAYBACK DEVICE”.
Search may take time, depending on the recording status of the
index signal. Press the STOP button while searching to end search.
Press the desired camera number button when performing skip
search in SPLIT9 display, the video of the camera number button is
changed to single screen display.
4. Press the PAUSE button when the desired video is displayed and press the
PLAY button.
5. To stop ALARM SKIP SEARCH, press the STOP button.
6. To clear the search screen, press the SEARCH button twice.
When performing skip search in the reverse direction with index
signals of less than 4 seconds, that portion may play back repeat-
edly. In this case, press the STOP button to stop the search and
perform skip search in the reverse direction again after the particular
portion has been passed using reverse playback, etc.
- DX-TL950E 1
- Features 2
- Caution and care 4
- MAINS LEAD CONNECTION 5
- Contents 6
- Flowchart 8
- see page 37 10
- 19 20 21 22 23 24 11
- Beginning 13
- Connections 15
- Connections (continued) 16
- AUTO SET UP 17
- AUTO SET UP (continued) 18
- Basic Operations 19
- Basic Operations (continued) 20
- INFORMATION 21
- REC/STOP 23
- Menu functions 26
- SUB MENU (1) 27
- MAIN MENU 27
- SUB MENU (2) 27
- SUB MENU (3) 27
- Menu functions (continued) 28
- SUB MENU (1) SUB MENU (2) 29
- • The setting is confirmed 32
- Operations 33
- ■ DUPLEX MODE DISPLAY 34
- <MPX DISPLAY SETTINGS> 35
- see page 76) 36
- ■ MPX DISPLAY SETTINGS 37
- ■ SPLIT4 SCREEN SETTING 37
- ■ SPLIT9 SCREEN SETTING 37
- ■ SEQUENCE SETTING 38
- ■ INTERLACE 38
- ■ SELECTION CAMERA NUMBER 39
- ■ DETECTION MASK SETTING 39
- ■ SENSITIVITY 40
- ■ MOTION THRESHOLD 40
- ■ TEST MODE 40
- <RECORD SETTINGS> 41
- About alarm recording 42
- ■ ALARM REC DURATION 43
- ■ PRE ALARM REC 43
- ■ MOTION DET REC 43
- ■ TIMER PROGRAM SETTINGS 44
- ■ TIMER PROGRAM 44
- SPL 12:30 13:00 A ON 45
- SPL WED-SAT 45
- Program 2 46
- Program 1 Program 1 46
- IMAGE MODIFIED( ) 47
- >> 47
- ♦ SEQUENTIAL PLAY 48
- ■ AUDIO RECORDING 48
- ■ INFORMATION/SERVICE 54
- ■ PASSWORD 56
- ■ LANGUAGE SELECTION 58
- <QUICK SETTINGS> 59
- Operation examples 60
- ■ Operation example 2 61
- ■ Operation example 3 62
- Various recordings 64
- Various playback functions 65
- 1-2. Press the PLAY button 66
- Various search 67
- Various search (continued) 68
- ■ ALARM SKIP SEARCH 69
- ■ START/END SEARCH 71
- Making Copy/Restore 72
- Other convenient functions 74
- ■ COVERT CAMERA SETTING 76
- Communications by Web Browser 77
- Recording time table 83
- Recording Time Table 84
- Troubleshooting 85
- Troubleshooting (continued) 86
- CALL OUT 87
- Warnings and CALL OUT output 88
- Glossary 89
- Specifications 90
- FRANÇAIS 93
- CASTELLANO 95
- ITALIANO 97
- Others (Continued) 100
- NEDERLANDS 100
- PORTUGES 101
- 872C277A9 PRINTED IN MALAYSIA 108
Produits connexes et manuels pour Matériel d'enregistrement Mitsubishi Electric DX-TL950E
Matériel d'enregistrement Mitsubishi Electric Central Controller GB-50A Manuel d'installation
(20 pages)
(20 pages)
Matériel d'enregistrement Mitsubishi Electric Central Controller GB-50A Manuel d'utilisateur
(11 pages)
(11 pages)
Matériel d'enregistrement Mitsubishi Electric Central Controller GB-50A Manuel d'instructions
(31 pages)
(31 pages)
(164 pages)
(172 pages)
(20 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels