Mitsubishi Electric DX-TL950E Manuel d'instructions télécharger pdf (Page 48)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

♦ SEQUENTIAL PLAY

It is possible to make archive of the video recorded with

this unit to an analogue video recorder, etc., while playing

back the video of each camera in order using the single

screen display. During single screen sequential playback,

the SPLIT/SEQUENCE button will light. In addition, the

playback order/time of each camera will be the order of

the recorded video.

HDD REPEAT REC MAIN ON

HDD REPEAT REC SUB OFF

HDD REPEAT PLAY OFF

IM-CHECK PLAY OFF

SEQUENTIAL PLAY OFF

Setting ( default : “OFF” )

“ON” : Plays back the video in the single screen se-

quential mode.

“OFF” : Does not play back the video in the single

screen sequential mode.

Playback is performed during camera sequential play

at an interval of 25P. To change the playback interval, press

the PLAY button (or the REV. PLAY button)( see

“Changing playback intervals, pages 65,66).

1. Press the SET UP button

}

}

<INITIAL SET

UP/INFORMATION>

}

Select “SEQUENTIAL PLAY” in the

<HDD SETTINGS> screen. Display the desired setting and

confirm.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

3. Press the PLAY button.

4. Press one of the camera number buttons with recorded video.

• Single screen sequential playback starts.

When performing camera sequential playback for

video with long recording intervals, the video of the

largest camera number selected for recording will be

played back the longest.

Only the camera number (title) of the pressed cam-

era number button is displayed. Other camera number

(titles) will not be displayed. If display is not necessary,

select “NONE” in the <CAMERA DISPLAY> (

see

page 32).

■ AUDIO RECORDING

This unit can simultaneously record audio along with the

video. When recording audio, the continuous recording

time becomes shorter than when recording only video.

HDD SETTINGS

AUDIO RECORDING OFF

REAR TERMINAL SETTINGS

COMMUNICATION PORT SETTINGS

INFORMATION/SERVICE

PASSWORD

LANGUAGE SELECTION

Setting ( default : “OFF” )

“ON” : Records video and audio.

“ALARM” : During alarm recording or emergency re-

cording, records video and audio.

“OFF” : Does not record audio.

1. Press the SET UP button

}

}

Select “AUDIO

RECORDING” in the <INITIAL SET UP/INFORMATION>

screen. Display the desired setting and confirm.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

When setting “AUDIO RECORDING” to “ON”, a

speaker display (

) appears to the right of recordable

time display in the <RECORD SETTING> and

screens.

ALARM CH

NO PPS GRADE A-PPS A-GRADE

2.5P STD 2.5P STD

<ESTD REC> D H M

Even when setting “AUDIO RECORDING” to “ON”,

audio cannot be recorded for the following settings.

• Audio recording cannot be performed when “PPS” of

“RECORD SETTING” are all set to smaller than

“0.333P” when setting normal recording. In this case,

( X ) appears to the right of recordable time display.

• When the camera selection during alarm recording is

as follows :

“ALARM CH” : “A-PPS” of all cameras set for alarm

recording are set to smaller than “0.333P”.

“ALARM PLUS”, “ALARM25” : “PPS” and “A-PPS” of

all cameras set for normal recording and alarm record-

ing are set to smaller than “0.333P”.

<INITIAL SET UP/INFORMATION> (continued)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi Electric DX-TL950E Manuel d'instructions Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Mitsubishi Electric DX-TL950E