Mitsubishi Electric Central Controller GB-50A Manuel d'installation Page 1

Mitsubishi Electric Air-conditioner Network System Central Controller Model: GB-50A Instruction Book Contents

9(A) Level signal ① When the level signal is selected, the operation (only ON/OFF operation) for the central controller and the local remote control

10

11

1 Please take a moment to review these safety precautions. They are provided for your protection and to prevent damage to the controller. This safe

2 CAUTION Do not install the controller in a place where flammable gas could leak. If gas leaks and collects around t

3 2-1. About this manual This manual covers the settings that can be made or functions that can be displayed only on the GB-50A body. 2-2. Monito

4 3-1. Specification Table 3-1 Specification list Item Specification Interface M-NET : DC30V/24V;0.13/0.15A LAN : Ethernet 10Base-

53-2.Function list The use of GB-50A requires a license registration. By registering the license, group or block operation of the units on the Web br

63-3 Setting Functions Make initial settings with either the Initial Setting Web or Initial Setting Tool. Table 3-3 Lis

7 2) Setting of the service switch The switches must be OFF for normal use. The switch setting change works when the power is turned on

8 *External signal input requires the external I/O adapter (Model: PAC-YG10HA) sold separately. 4-1 External input function (1) The function of e