Mitsubishi Electric FR-F800 Manuel d'instructions

INVERTERFR-A800/F800Safety Stop Function Instruction ManualCONTENTS1. GENERAL DESCRIPTION ... 22. INSTALLATIO

EXAMPLE OF SAFETY SYSTEM CONFIGURATION9●Safety controller configuration exampleFig.5 Safety system example with FR-A800/F800NOTE • When starting up th

10TEST AND CHECKING FAILURE4 TEST AND CHECKING FAILUREI/O status and failureFR-A800/F800 safety related I/O status obeys the following truth table.Tab

SAFETY PARAMETERS OF FR-A800/F80011DiagnosticIf the failure detected, FR-A800/F800 output alarm signal and indicate ‘E.SAF’ at the display.In case of

12REVISIONSPrint Date Manual Number RevisionApr. 2013 BCN-A23228-001(E) First editionJun. 2013 BCN-A23228-001-A(E)● Multiple inverter configuration ex

HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANMITSUBISHI ELECTRIC EUROPEEUROPE B.V.German BranchGothaer Straße 8D-40

1Compliance with the EU Machinery Directive – Functional SafetyWARNING Any misuse of safety function could lead to personal injury or death, property

2GENERAL DESCRIPTION1 GENERAL DESCRIPTIONFeaturesMitsubishi FR-A800/F800 safety stop function prevents a drive from supplying rotational energy to mot

INSTALLATION AND WIRING32 INSTALLATION AND WIRINGInstallationMitsubishi FR-A800/F800 safety stop function should be used under following condition and

4INSTALLATION AND WIRING●WiringThe safety related terminals are described in Table.2 and Table.3Table.2 The safety related terminals Specifications

INSTALLATION AND WIRING5Table.3 Truth table of safety related signals ON: The transistor is conducted. OFF: The transistor is not conducted. When

6INSTALLATION AND WIRING●Wire and ferrule specificationTable.4 Wire and ferrule specification Ferrules and tools are distributed by Phoenix Contact.

EXAMPLE OF SAFETY SYSTEM CONFIGURATION73 EXAMPLE OF SAFETY SYSTEM CONFIGURATION●FR-A800/F800 configuration example If the control logic is SINK logi

8EXAMPLE OF SAFETY SYSTEM CONFIGURATION●Multiple inverter configuration exampleFig.4 When using multiple safety stop function inverters (FR-A800/F800)