Mitsubishi Electric GB-24A Manuel d'utilisateur télécharger pdf (Page 23)

Next a screen to select the schedule setup method will appear.

Select either [New settings] or [Based on the following group

settings]. If you plan to add to an existing setting, and then choose

to base it on an existing setting and select the name of the group

you want to base the setting on and click the [OK] button.

If you chose to make a new setting, the Contents of Schedule box

will appear completely blank. If you chose to base your setting on

an existing group, the contents of the schedule set for that group will appear in the Contents of Schedule

box.

(2) Select the day of the week

Click the day of the week listed in the Contents of Weekly

Schedule box you want to set the schedule for. You can select

from Sunday through to Saturday.

(3) Set the contents of the schedule

When one of the [Edit] buttons in the Contents of Schedule box is

clicked, a screen to set a schedule operation will appear. Use this

screen to set when to run an operation and set the type of schedule

operation (ON/OFF, operation mode, temperature setting, prohibit

remote controller operation) and then press the [OK] button.

It is also possible to set a schedule operation that is only an operation

mode or temperature setting modification. To do this, simply limit your

setting to the particular details you want to change.

The upper/lower limit temperatures must be set to operate the unit in

the Setback mode.

Note: When setting a schedule for all groups or for a block, it is possible to set

all operation modes such as Auto mode etc, but if some targeted air

conditioner units do not have such a function, then those units will not run

in the specified mode. When setting the schedule, consider what functions are supported by the air conditioner units.

Note: When setting a schedule for all groups or for a block, it is possible to set prohibit remote controller

items individually. When allowing remote controller operation under K control, however, all items

must be set enable.

Note: When setting a schedule for ventilator units, the temperature setting is not displayed. Moreover,

the prohibit remote controller operation is simply [ON/OFF].

Note: Note: Only the ON/OFF operation is possible on the general equipment.

(4) Copy a schedule to another day of the week or to another group

When copying a schedule between each day of the week, click

"Copy (Day of the week)" button. The color of the button turns to

green (which means the button is selected). Select the desired day,

and click "Paste" button.

When copying the entire week's schedule between groups, click

"Copy (Group)" button. Select the desired group, and click "Paste"

button.

Note: Copied schedule cannot be pasted to different type of equipment. For

example, schedule copied on the air conditioner cannot be pasted to the

ventilator equipment.

Note: The operation mode that can be pasted and the temperature setting

range vary depending on the unit type.

(5) Save the contents of schedule

After you have finished setting the contents of the schedule, save

the schedule setting by clicking the [Save Settings] button.

If the contents of the schedule setting have changed since the

previous save, you can click the [Undo] button to restore the setting

contents back to the saved settings.

Note: When saving a schedule setting for all groups or for a block containing

multiple groups, it can take several minutes until the setting is

complete due to the large number of units being set.

Save Settings button

Copy (Day of the week) / Paste

Copy (Group) / Paste

OK Button

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi Electric GB-24A Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Mitsubishi Electric GB-24A