Mitsubishi-electric QJ71C24N Manuel d'utilisateur télécharger pdf (Page 63)

3 - 13 3 - 13

MELSEC-Q

3 SPECIFICATIONS

3.6 Utility Package (GX Configurator-SC) Function List

The following table lists the utility package function for the Q series C24.

(

: Protocol for which setting is valid)

Function MC

Non-

procedure

protocol

Bidirectional

protocol

Explanation

page

Remarks

Auto refresh setting

Refresh the Q series C24's error codes and set devices on the PLC

CPU side.

Section 4.6

User frame Register the user frame in the flash ROM. — Section 8.4.1

Data for modem initialization Register the data for modem initialization in the flash ROM. Section 8.4.2

Data for modem connection Register the data for model connection in the flash ROM. Section 8.4.3

Modem function system

setting

ROM.

Section 8.4.4

CHn Transmission

control and others

system setting

Set the transmission specifications with the other device.

(DTR/DSR control, DC code control, communication method, data

communication monitoring timer value, etc.)

Section 8.4.5

CHn MC protocol

system setting

Assign the buffer memory for on-demand function, set the user

frame number, etc.

— — Section 8.4.6

CHn Non procedure

system setting

Assign the buffer memory needed to perform data communication

using the non procedure protocol, and change the setting values,

etc.

—

— Section 8.4.7

CHn Bidirectional

system setting

Assign the buffer memory needed to perform data communication

using the bidirectional protocol, and change the setting values, etc.

——

Section 8.4.8

CHn PLC CPU

monitoring system

setting

Set the PLC CPU monitoring function.

— Section 8.4.9

System

setting

CHn Transmission

user frame No.

designation system

setting

Set the user frame number to be transmitted, etc. —

— Section 8.4.10

Can be used

via online

operation.

Can be used

via offline

operation.

System setting default

Reset the setting values in the buffer memory to their default

values.

Section 8.4.11

System setting write Write the setting values in the buffer memory to the flash ROM. Section 8.4.11

Flash ROM write

allow/prohibit designation

Set whether to allow or prohibit writing to the flash ROM. — — — Section 8.4.12

X · Y monitor/test Perform the monitoring/testing of I/O signals to/from the PLC CPU. Section 8.6.1

Modem function monitor/test Monitor the execution status of the modem function. Section 8.6.2

CHn Transmission

control and others

monitor/test

Monitor the status of interface control signals, values set from the

GX Developer, etc.

Section 8.6.3

CHn MC protocol

monitor

— — Section 8.6.4

CHn Non procedure

monitor/test

—

— Section 8.6.5

CHn Bidirectional

monitor

Monitor the data communication result, I/O signal status, and

setting values in the buffer memory.

——

Section 8.6.6

CHn PLC CPU

monitoring monitor

Monitor the setting values and operating status of the PLC CPU

monitoring function.

— Section 8.6.7

Monitor

CHn User frame

No. designation

monitor for

transmission

Monitor the setting value for user frame to be transmitted.

— Section8.6.8

Monitor/test others Monitor the data reception result, error occurrence status, etc. Section 8.6.9

ERR LED off Turn off the ERR LEDs on the front face of the module. Section 8.6.10

Non procedure protocol

receive data clear

Clear the currently received data. —

— Section 8.7

Can be used

only via

online

operation.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 357 358

Commentaires sur ces manuels

Pas de commentaire

Mitsubishi-electric QJ71C24N Manuel d'utilisateur Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Mitsubishi-electric QJ71C24N